High Pressure Cleaning
SYDNEY, NSW

Refresh the look of your home and protect your roof
with our professional roof painting services.
High quality paints. Long lasting protection. Expert results.

Protects against weather & UV damage

Instantly refreshes the look of your home

Premium paints for long term performance

More affordable than a full roof replacement

GET YOUR FREE QUOTE TODAY!

Fast, transparent and obligation-free.
We’ll assess your roof and provide
the best solution.

No Obligation

Response

Sydney Wide

Professional Pressure Cleaning Services in Sydney

Over time, driveways, paths, walls and roofs collect dirt, mould, algae and stubborn stains that can leave your property looking tired and slippery. Aabacus Roofing Solutions provides professional high pressure cleaning across Sydney, using the right cleaning method and pressure for every surface to deliver a thorough clean without causing unnecessary damage.

As experienced roofers, we also clean areas that many pressure cleaning companies avoid, including tile roofs, gutters, and second-storey render. With the right equipment and experience working at heights, we can safely clean both hard-to-reach areas and ground-level surfaces.

Pressure Cleaning Services Sydney Properties Rely On

Concrete Driveways and Paths

Concrete driveways and paths are among our most common pressure-cleaning jobs. We pre-treat oil and tyre marks where needed, then use a rotary surface cleaner for an even, streak-free finish. Exposed aggregate, stencilled and coloured concrete all require the right pressure to avoid damaging the surface. A typical double driveway usually starts from $[250–350] and takes around 1–2 hours.

Tile roofs

Controlled pressure on sound cement tiles being prepared for coating; soft wash with biocide on older cement and all glazed terracotta. Roof cleaning is its own discipline. The full method guide is on our Roof Cleaning Sydney page.

House walls and render

Traffic film, cobwebs and mould shadows come off render and painted masonry using reduced pressure and fan tips. Blasting render at driveway pressure can force water into hairline cracks and damage the finish. Weatherboard and fibro get the gentlest treatment of all.

Pool Surrounds and Pavers

Pool surrounds and pavers can quickly become slippery as algae, dirt and grime build up over time. We use the right pressure for the surface to remove the buildup without damaging travertine or concrete pavers, then give the area a thorough rinse before we finish.

Decks, pergolas and outdoor areas

Grey, weathered timber responds well to low-pressure work along the grain; high-pressure furring of the timber surface shortens its life. If you’re planning to oil or stain afterward, tell us: the clean is the preparation.

Strata, Commercial and Shopfronts

We provide scheduled pressure cleaning for common areas, car parks, bin bays, awnings and shopfronts, whether it’s monthly, quarterly or before an inspection. Safe Work documentation and flexible after-hours scheduling are available, along with a single point of contact and a photographic record of every visit.

Indicative Pricing, So You Can Budget Before You Call

Job	Typical range	Typical duration
Double driveway + path	$[250 – 400]	1–2 hours
Driveway + paths + pool surround package	$[450 – 700]	Half day
Full exterior (driveway, paths, walls, pool surround)	$[700 – 1,200]	Half–full day
Roof clean (see roof cleaning page)	$[600 – 1,500]	Half–full day
Strata/commercial programs	Quoted on scope	Scheduled

Every quote is itemised by surface, so you’ll see exactly what each area costs and can add or remove surfaces before we start.

High Pressure vs Soft Washing, What Your Surface Actually Needs

The biggest mistake in this trade is one machine, one pressure, every surface. High pressure (2,000–4,000 PSI) is right for concrete and stone. Older roof tiles, painted surfaces, render and timber need soft washing- lower pressure with the right cleaning solutions doing the work, or the surface itself starts coming off with the dirt. We carry both setups on every job. A quick rule of thumb: if the surface was manufactured with a coating, glaze, or finish, it probably shouldn’t be subjected to full pressure; if it’s bare concrete or stone, it can take it.

Our Sydney-Wide Pressure Cleaning Process

Inspect

We assess the surface, its condition, any stains, drainage and nearby areas that need protecting, such as gardens, window seals and older mortar.

Protect

Outdoor furniture is moved where needed, gardens are watered, and electrical points are covered before work begins.

Pre-treat

Oil stains are treated with a degreaser, while moss and lichen are treated before cleaning to help reduce regrowth.

Clean

We use the right pressure and equipment for each surface to achieve an even finish without causing unnecessary damage.

Rinse

We rinse the area thoroughly, direct runoff away from pools and garden beds, and collect any debris.

Final walk-through

Before we leave, we’ll walk you through the completed work to make sure you’re happy with the result.

When Should You Book Pressure Cleaning?

Before selling, clean driveways and rooflines photograph dramatically better; it’s the cheapest uplift in the pre-sale playbook
Before painting or coating, coatings fail early on dirty surfaces; cleaning is mandatory preparation, not cosmetic
After winter, shady-side algae that makes paths dangerously slippery peaks in the cooler months
Before storm season, combined with a gutter clear, so water moves where it’s designed to
After building work, concrete dust, mortar splash and boot traffic ground into new surfaces

Common DIY Pressure Cleaning Mistakes We Get Called to Fix

Hire-machine wand held too close to concrete, leaving permanent “zebra striping” that only grinding removes
High pressure on old terracotta, strips the fired surface and turns a sound roof porous
Blasting render or weatherboard joints and forcing water into the wall cavity
Cleaning without pre-treatment, the moss looks gone but the roots survive, and it’s back within a season
No runoff plan, detergent and debris straight into the pool or the neighbour’s garden

Why Choose Aabacus for Pressure Cleaning in Sydney

Surface-matched pressure on every job, two full setups on the truck, not one
Roofing specialists, we clean above and below the gutter line safely and legally
Fully insured; licensed roofing business, NSW licence
Sydney-wide service from Rydalmere, fastest scheduling across Ryde, the Inner West, North Shore and Hills
Free itemised quotes; bundle pricing when cleaning joins a roof restoration or painting job

Book Your Free High Pressure Cleaning Quote

Whether you need to freshen up a driveway, clean a roof, restore pool surrounds or maintain a commercial property, Aabacus Roofing Solutions delivers professional high pressure cleaning tailored to every surface. We use the right equipment, the right pressure and the right cleaning method to achieve great results without causing unnecessary damage.

Call 0404 397 198 today to book your free, itemised quote. We’ll assess your property, recommend the best cleaning approach and provide upfront pricing before any work begins.

High Pressure Cleaning Sydney FAQs

How much does high pressure cleaning cost in Sydney?

Standard double driveways typically start from $[250–350]; full exterior packages run $[700–1,200]. Every quote is itemised by surface, fixed before we start, with no call-out fee in our core zones.

Do you offer Sydney-wide pressure cleaning?

Yes, we service all of Sydney from Rydalmere. Ryde, Parramatta, the Inner West, North Shore and Hills District are our fastest zones, usually within the week.

Will pressure cleaning damage my driveway, tiles or render?

Not when the pressure matches the surface, that’s the entire discipline. Concrete takes high pressure; tiles, render, painted surfaces and timber get soft-washed. The damage stories you’ve heard almost all trace back to one machine used on everything.

What’s the difference between pressure washing and soft washing?

It depends on what we’re cleaning. Pressure washing is best for hard surfaces like concrete, while soft washing is used on roofs, render and painted surfaces where high pressure could cause damage. We’ll recommend the right method for your property.

How long does a typical job take?

It depends on the size of the job. Most driveways take around 1–2 hours, while larger exterior cleans can take half a day or longer. We’ll let you know how long to expect before we get started.

How long do the results last?

Most concrete surfaces stay looking clean for around 12–24 months. If your property has lots of shade or overhanging trees, you may notice algae and grime returning sooner.

Is the runoff safe for gardens and pools?

We do our best to keep runoff away from pools, garden beds and other sensitive areas while we work. If you have a pond or delicate plants, let us know before we arrive so we can take extra care.

Do you do commercial and strata work?

We do. We work with strata managers and commercial property owners on scheduled cleaning for common areas, car parks, shopfronts and other shared spaces. After-hours appointments can also be arranged where required.

Our Portfolio

Our Roof Restoration Services in Sydney

Roof Painting

Roof painting is a crucial step for concrete roof tiles. As it provides a protection layer and seals the tiles to ensure they are water tight. Terricotta roof can be coated using paint, sealants, or specialized roof coatings.

Roof Restoration

The process starts with a thorough inspection of the roof’s condition. Roofing professionals assess the state of the roof, looking for signs of damage, leaks, and other issues. This inspection helps determine the scope of work required.

High Pressure Cleaning

Before any repairs or coatings are applied, the roof is cleaned to remove dirt, debris, moss, algae, and other contaminants. This cleaning can be done using pressure washing or other appropriate methods.

Roof Repairs

After cleaning, any damaged or deteriorated roofing materials are addressed. This may involve replacing broken or missing tiles, repairing damaged flashing, or addressing structural issues.

Driveway cleaning

A clean driveway is the gateway to a stunning roof! Trust our specialists for thorough driveway cleaning services that complement your roofing project.

Suburbs We Serve

Book A Free Roof Inspection

We will contact you to organise an appropriate time to meet.

Contact Our Roofing Specialists

We are based in the outer Sydney suburbs, helping clients in Epping, Ryde and more. For a team of highly qualified and reliable tradesman who have had over a decade in the industry, contact us today.

High Pressure Cleaning SYDNEY, NSW